Foto Messschieber
Grafik Werbebanner
Nicht mit Werbung belegte Werbekachel.
Hinweis
Grafik Werbung

ISO - Normen zur Koordinatenmesstechnik und Längenmesstechnik

Die folgenden Normen zur Koordinatenmesstechnik und Längenmesstechnik sind direkt vom ISO (International Organization for Standardization bzw. Internationale Organisation für Normung) verabschiedete Normen.

 GRÜN = gültige Norm
 GELB = Entwurf
 ROT = ungültige Norm (Zurückziehung)


1 | 6906 | 14253 | 17865 | 22093




1
Norm Titel Titel Datum
ISO 1 Standard reference temperature for industrial length measurements 04/1975 - 07/2002
ISO 1 Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification 07/2002 - 09/2016
ISO 1 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties 09/2016


6906
Norm Titel Titel Datum
ISO 6906 Meßschieber mit Noniusteilung bis 0,02 mm Vernier callipers reading to 0,02 mm 04/1984 - 07/2011


14253
Norm Titel Titel Datum
ISO 14253-1 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 1: Decision rules for proving conformance or non-conformance with specifications 11/1998 - 09/2013
ISO 14253-1 Geometrical product specifications(GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specifications 09/2013 - 102017
ISO 14253-1 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications 10/2017
ISO 14253-2 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification 04/2011
ISO 14253-3 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements 04/2011
ISO 14253-5 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments 09/2015


17865
Norm Titel Titel Datum
ISO/TS 17865 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems 08/2016


22093
Norm Titel Titel Datum
ISO 22093 Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS) 11/2003 - 05/2011
ISO 22093 Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS) 05/2011